ANIONIC MEDIUM SETTING (HFMS-2)
General information
- Anionic Slow Setting bitumen emulsion is cold/non-fiberated liquid applied waterproofing bitumen emulsion. The product is made using a process in which the bitumen, special emulsifier, water and other additive have been gone through a high shear rate colloid mill and the properties of bitumen have direct effect on the emulsion specification.
- Cationic emulsions HFMS-2 may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use in comparing with cutback, and can be applied in a wider range of conditions.
- Sprayed Sealing – Cationic emulsions HFMS-2 are used extensively in sprayed sealing applications, particularly in cooler weather where they provide improved initial stone retention due to their lower viscosity.
- Packing: 220, 230, 240(Liter) new steel drum
Technical Specifications:
| Property | Min | Max | Test Method |
|
Viscosity, Saybolt Furol at 25 °C, SFS |
100 |
200 |
ASTM D244 |
|
Storage stability test, 24-h, % |
- |
1 |
ASTM D6930 |
|
Particle charge test |
Minus |
|
ASTM D244 |
|
Sieve test, % |
- |
0.1 |
ASTM D6933 |
|
Distillation: |
|||
|
Residue, % |
65 |
- |
ASTM D244 |
|
Test on residue from distillation |
|||
|
Float test, 60 degrees Celsius , s |
1200 |
- |
ASTM D139 |
|
Penetration, 25°C (77°F), 100 g, 5 s |
100 |
200 |
ASTM D5 |
|
Ductility, 25°C (77°F), 5 cm/min, cm |
40 |
- |
ASTM D113 |
|
Solubility in trichloroethylene, % |
97.5 |
- |
ASTM D2042 |