ANIONIC MEDIUM SETTING (HFMS-2h)
General information
- Anionic Slow Setting bitumen emulsion is cold/non-fiberated liquid applied waterproofing bitumen emulsion. The product is made using a process in which the bitumen, special emulsifier, water and other additive have been gone through a high shear rate colloid mill and the properties of bitumen have direct effect on the emulsion specification.
- Cationic emulsions HFMS-2h may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use in comparing with cutback, and can be applied in a wider range of conditions.
- Sprayed Sealing – Cationic emulsions HFMS-2h are used extensively in sprayed sealing applications, particularly in cooler weather where they provide improved initial stone retention due to their lower viscosity.
- Packing: 220, 230, 240(Liter) new steel drum
Technical Specifications:
| Property | Min | Max | Test Method |
| Viscosity, Saybolt Furol at 25 °C, SFS | 100 | - | ASTM D244 |
| Storage stability test, 24-h, % | - | 1 | ASTM D6930 |
| Particle charge test | Minus | ASTM D244 | |
| Sieve test, % | - | 0.1 | ASTM D6933 |
| Distillation: | |||
| Residue, % | 65 | - | ASTM D244 |
| Test on residue from distillation | |||
| Float test, 60 degrees Celsius , s | 1200 | - | ASTM D139 |
| Penetration, 25°C (77°F), 100 g, 5 s | 40 | 90 | ASTM D5 |
| Ductility, 25°C (77°F), 5 cm/min, cm | 40 | - | ASTM D113 |
| Solubility in trichloroethylene, % | 97.5 | - | ASTM D2042 |