Sat-Thu: 09:00 - 17:00

ANIONIC MEDIUM SETTING (MS-1) 

General information

  • Anionic Slow Setting bitumen emulsion is cold/non-fiberated liquid applied waterproofing bitumen emulsion. The product is made using a process in which the bitumen, special emulsifier, water and other additive have been gone through a high shear rate colloid mill and the properties of bitumen have direct effect on the emulsion specification.
  • Cationic emulsions MS-1 may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use in comparing with cutback, and can be applied in a wider range of conditions.
  • Sprayed Sealing – Cationic emulsions MS-1 are used extensively in sprayed sealing applications, particularly in cooler weather where they provide improved initial stone retention due to their lower viscosity.
  • Packing: 220, 230, 240(Liter) new steel drum

Technical Specifications:

Property Min Max Test Method
Viscosity, Saybolt Furol at 25 °C, SFS 20 100 ASTM D244
Storage stability test, 24-h, % - 1 ASTM D6930
Particle charge test Minus ASTM D244
Sieve test, % - 0.1 ASTM D6933
Distillation:
Residue, % 55 - ASTM D244
Test on residue from distillation
Penetration, 25°C (77°F), 100 g, 5 s 100 200 ASTM D5
Ductility, 25°C (77°F), 5 cm/min, cm 40 - ASTM D113
Solubility in trichloroethylene, % 97.5 - ASTM D2042