Sat-Thu: 08:00 - 18:00


General information:

  • Bitumen emulsion CMS-2 consists of three basic ingredients: bitumen, water, and an emulsifying agent. Based on specificationsit may contain other additives,such asstabilizers, coating improvers, anti-strips, or break control agents. It is well known that water and asphalt will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives.
  • Cationic emulsions CMS-2 may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use in comparing with cutback, and can be applied in a wider range of conditions.
  • Sprayed Sealing – Cationic emulsions CMS-2 are used extensively in sprayed sealing applications, particularly in cooler weather where they provide improved initial stone retention due to their lower viscosity.
  • Packing: 220, 230, 240(Liter) new steel drum.

Technical Specifications:

Property Min Max Test Method
Viscosity, Saybolt Furol at 50 °C, SFS 50 400 ASTM D7496
Storage stability test, 24-h, % - 1 ASTM D6930
Particle charge test Positive ASTM D244
Sieve test, % - 0.1 ASTM D6933
Solvents, by volume of emulsion, % - 12 ASTM D6997
Residue, % 65 - ASTM D6997
Test on residue from distillation:
Penetration, 25°C (77°F), 100 g, 5 s 100 250 ASTM D5
Ductility, 25°C (77°F), 5 cm/min, cm 60 - ASTM D113
Solubility in trichloroethylene, % 97.5 - ASTM D2042