CATIONIC MEDIUM SETTING (CMS-2h)
General information:
- Bitumen emulsion CMS-2h consists of three basic ingredients: bitumen, water, and an emulsifying agent. Based on specificationsit may contain other additives,such asstabilizers, coating improvers, anti-strips, or break control agents. It is well known that water and asphalt will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives.
- Cationic emulsions CMS-2h may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use in comparing with cutback, and can be applied in a wider range of conditions.
- Sprayed Sealing – Cationic emulsions CMS-2h are used extensively in sprayed sealing applications, particularly in cooler weather where they provide improved initial stone retention due to their lower viscosity.
- Packing: 220, 230, 240(Liter) new steel drum.
Technical Specifications:
| Property | Min | Max | Test Method |
| Viscosity, Saybolt Furol at 50 °C, SFS | 50 | 450 | ASTM D7496 |
| Storage stability test, 24-h, % | - | 1 | ASTM D6930 |
| Particle charge test | Positive | ASTM D244 | |
| Sieve test, % | - | 0.1 | ASTM D6933 |
| Solvents, by volume of emulsion, % | - | 12 | ASTM D6997 |
| Distillation: | |||
| Residue, % | 65 | - | ASTM D6997 |
| Test on residue from distillation: | |||
| Penetration, 25°C (77°F), 100 g, 5 s | 40 | 90 | ASTM D5 |
| Ductility, 25°C (77°F), 5 cm/min, cm | 40 | - | ASTM D113 |
| Solubility in trichloroethylene, % | 97.5 | - | ASTM D2042 |